Price : $13.99
You Save : $22.00 (61%)
Product Description
Use with Closed Circuit Television (CCTV) applications and security camera components. This pre-terminated CCTV cable is perfect for transmitting video and power. Simplify the installation of surveillance systems by using one cable to carry video and power. Extend the cable on your camera easily with this extension kit. Don't waste time soldering or crimping together your own cables or voiding the warranty by splicing in your own wires. Most cameras only have a few feet of cable coming off the camera. This cable will help you to extend the power and video signals. Now, it's easier than ever to mount your camera just about anywhere you would like. For camera with DC power only
Buyer Critiques
I bought this cable through Amazon. This wire is typically utilised to connect a surveillance camera to a Tv monitor or a recording device (VCR or DVR). Each end of the wire has a plug for video and DC power. One end of the cable has a male 2.1mm DC power connector and a male RCA kind video plug. The other finish of the cable has a female DC power connector and a female BNC video plug. The seller is generous enough to incorporate 2 conversion adapters in case you have to have an RCA plug on each ends (for a normal VCR or monitor) or you need to have a BNC connection on both ends (commonly seen on time-lapse security recording devices and some alot more high priced cameras). The price tag was very reasonable for 100 feet of cable and the cable does operate nicely.
Now for the "but...' component in the title of this review:
I failed to look closely at the picture. If you do appear closely at the picture you will see two separate wires at every single end of the cable which are joined into a single single wire a handful of inches later. I assumed that there would be two wires attached to every other for the entire cable length just like any typical electric cord. If your security setup has your recording device suitable subsequent to your power provide then this wire is fine and there is no dilemma. Then again if you have your recording device is in a lock box for added security and your power supply is not located in the lock box (possibly for the reason that of concern about excessive heat buildup from the power brick or space or electrical considerations) then you will not be in a position to separate the video and power wire so that you can run the power wire to a various location. Cable that I bought a few years ago had 2 wires on each and every finish of the cable that are joined a couple of inches later just like this wire but the wires remain separate (but attached) along the whole length of cable. I could split the two apart with a knife for any length I chose. In my case my power provide is 10 feet away. In all likelihood the seller would accept a return but with the shipping cost it is quite possibly not worth it for me. I will now have to acquire a 10 foot DC power cable extension wire and run the additional wire from the lock box to the power brick. Two distinct wires would have been so considerably simpler and less messy. As I mentioned this a single is my mistake. I did not know this wire was sold in this format. On the plus side if stealth is element of your setup then a single wire is a lot easier to hide than a double joined wire.
The seller was swift with shipping and had fine communication about the buy.
cable bought with a Video-Secu camara. Functions just fine. We even cut it due to the fact it was to lengthy and it is created of 3 smaller wires that we could effortlessly reconnect with all necessary protection
Related Product
No comments:
Post a Comment